Armstrong Integrated Systems packaged plant rooms are manufactured in accordance with The Pressure Equipment Regulations 1999.

Features Mild steel galvanized base frame to BS EN 1461. Insulated floor. LPCB 45mm thick composite insulated building panels giving a thermal transmittance value of 0.43 W/m²K. Non-slip rubber matting. Ridge ventilation. Fall arrest system bracketry. Aluminum louvred doors available as a single or double complete with high security locks. Rainwater pipework. Available in 27 colours, colour matched wall, roof panels, louvred doors, and rainwater pipework - CORUS HP200 Colourcoat.

Enclosure Specifications:

Structure:

• Heavy gauge mild steel base frame.
• Hot dip galvanised base to BS EN 1461.
• Mild steel galvanised superstructure.
• Slotted superstructure for rapid fixing of attachments.
• Designed to accommodate the full operating load of the installed equipment.

• Steel floor plates.
• Finished one coat primer and coated in a zinc rich semi gloss.
• Joints mastic sealed to provide a water tight deck.
• Foil faced Celotex insulation board fixed to the underside of the floor to prevent condensation.
• Floor drain incorporated.
• Walkways fitted with non-slip rubber mats.

• 45mm thick composite insulated building panels.
• Insulation core LPCB certified to LPS 1180 grade ‘B’ HCFC.
• Thermal transmittance value of 0.43 W/m²K.
• HCFC free urethane foam core.
• Ozone Depletion Potential (ODP) of zero.
• External pre-coated steel sheet 0.6mm thick finished with a Plasticol coating.
• Internal liner pre-coated steel 0.35mm thick.
• Inner and outer facings, Class 1 surface spread of flame to BS476: Part 7: 1987, and are Class O, as defined by Building Regulations.
• External face of the insulated panel has FAA or SAA classification to BS476: Part 3: 1975.
• Acoustic performance produces a predicted single Weighted Sound Reduction Index (Rw) value of 27dB.
• The roof shall be dual pitched at 7°.
• Welded cleats at each gable enable for the attachment of a fall arrest system
• Performance life of the cladding system shall be 25 years in normal environments.
• Kingspan XL200 External Coating System Leathergrain finish available in 28 colours.
• Metallic finishes available upon request.
• Kingspan KS 1000/900/600 FL-S Flat Stucco Wall Panels, Horizontally Laid, 45 mm thick – XL200 Leathergrain.
• Kingspan KS 1000 RW Roof Panels, 40 mm thick – XL200 Leathergrain.

• Double or single leaf steel construction.
• Fully louvered or insulated to suit plant room requirements.
• Powder coated.
• High security locks.

• Ventilation in accordance with BS6644:1991.
  IGEUP/10 part 1 edition 2 (over 2MW)
• Ridge Ventilation.
• Louvred access door.
• High and low level louveres.

• Fitted to each side of the plant room.
• Available as an option to be constructed to match the cladding system.

• Designed to be lifted from the base.
• Approved lifting pads welded to the base.
• Test certification.